In some instances you can request use of a standpipe - this page lets you find out the necessary conditions and requirements.
Standpipes are portable water services designed to be connected to a hydrant in a water main to gain access to bulk water.
Standpipe are a last resort option when all other possible alternative water sources are not available, or do not meet the required water quality requirements.
All standpipes used in the Perth Metro region must be metered and hired from us. The standpipe may only be used in the Perth Metro region which is an area bounded by the local government boundaries of Rockingham, Serpentine-Jarrahdale, Armadale, Mundaring, Swan, Kalamunda and Wanneroo. Water Corporation standpipes must not be used at the Perth Airport or Fremantle Port Authority locations as the hydrants are privately owned.
In regional areas, including Mandurah customers can access bulk water through fixed standpipe stations.
There are 2 sizes of metered standpipes 25mm (100 litres per minute) and 40mm (250 litres per minute).
Hydrant standpipes can be used for the following purposes:
- short term pavement works (e.g. car park/footpath construction)
- landscaping and tree works
- high pressure applications
- drain cleaning
- chemical application
- water boring
- dust suppression
- filling a storage vessel (drinking or other).
It is forbidden to fill a swimming pool from a hydrant source unless the water is carted to the property and there is no alternative water source at the property where the pool is located.
A licence will not be issued where an alternative water source is available within a 5 kilometre radius of the intended location of use. The alternatives could include water courses, shared bores or dams.
Bulk water requirements for dust suppression will not be approved unless the following is provided with the application:
- Refusal from the Department of Water or other responsible department that it has refused to grant to the Applicant a licence under section 5C of the Rights in Water and Irrigation Act 1914 (WA); or
- Written support advice for using potable water on water quality grounds.
If you have a need for surface or groundwater water you must make application to the Department of Water and allow 3 months for your application to be assessed.
To apply for a water allocation licence for the Perth Metropolitan area you should contact the Department of Water’s Swan / Avon Regional Office on (08) 6250 8000 or the Kwinana / Peel Regional Office on (08) 9550 4222 or your local Department of Water office.
To hire a metered standpipe the applicant must complete the online application for a ‘Hire a Standpipe’.
Only 1 standpipe may be requested per application. A credit assessment will be performed as part of the approval assessment. An existing customer’s meter reading, licence renewal compliance and invoice payment history will also be checked. The following additional documents must accompany each hire or licence renewal application:
- Evidence / supporting information about why alternative sources of water supply are not suitable for the intended purpose.
- Identification (copy of driver’s license or passport).
- Wastewater permit (if water is disposed to sewer or stormwater drains).
- Copy of Public Liability Insurance Certificates.
Please read through the Hydrant Standpipe Licence Agreement terms and conditions carefully as they are the basis for which the standpipe is hired and by submitting the application you are agreeing to be bound by those terms and conditions.
Note: Allow up to 1 week for approval of a standpipe hire application upon provision of a completed application.
To extend the licence for the continued hire of a metered standpipe, the applicant must use the online Application for 'Extend a Licence'. A credit check and the applicant’s recent historical compliance with the terms and conditions of hire will be performed as part of the approval assessment.
By applying for a licence extension, the applicant is agreeing to the current version of the Hydrant Standpipe Licence Agreement terms and conditions. Please read through the Terms and Conditions carefully as they are the basis for which the standpipe is continued to be hired and by submitting the application you are agreeing to be bound by these terms and conditions.
Refer to the Perth Region Standpipe Hire Fees for current fees and charges. There is presently no additional fee to apply for a licence extension.
If the application is approved, we will contact you to pay an application fee, security bond and 1 month’s hire fees. When you supply a payment receipt, a goods docket will be issued advising of details to collect the standpipe. This docket must be presented to the store to receive a standpipe.
If the Licence Extension application is approved a new Licence will be issued and must be retained with the standpipe. The old licence document for the standpipe can then be destroyed.
- Monthly meter readings emailed to email@example.com prior to the 15th day of each month.
- To avoid interest charges, payment is to be made within 14 days of the date of the invoice.
- Standpipes that develop a fault or are damaged must be reported and returned as soon as practicable.
- The sale of your business requires the return of all your hired standpipes and settlement of your account.
- See the Terms and conditions for further information.
Hire a standpipe or extend a licence